Tissue Embedding Center
A programmable tissue embedding center with seven independently controlled working areas, PID temperature control, a 6-liter paraffin chamber, adjustable cooling module, and flexible manual or automatic operation for efficient histology workflows.
Brand:
YU SHUO DAItem NO.:
YSD-310Payment:
L/C D/A D/P T/T Western Union MoneyGramProduct Origin:
Liaoning ChinaShipping Port:
ShenyangLead Time:
15~25 days after we confirm the orderSize:
231.5*69*61cm(W*D*H)Material:
IRONCapacity:
6L
OLED Touchscreen for Clear Viewing: The energy-saving OLED screen provides a clear display without a backlight and supports viewing from different angles without stated visual blind spots.
Manual and Automatic Operation Modes: Manual mode allows the system to be started or stopped at any time, while automatic mode supports scheduled start and stop settings for weekdays, hours, and minutes.
Programmable Weekly Start and Stop: Fully programmable ON and OFF control allows the system to start and stop automatically according to a weekly schedule.
Touch and Foot Pedal Paraffin Control: Paraffin flow can be controlled through the finger touch plate and an optional foot pedal for flexible operation.
Status Indicator Lights on Control Buttons: Each operating button is equipped with a status indicator light so the current equipment state can be checked at a glance.
Adjustable Low-Voltage LED Illumination: The low-voltage LED light provides adjustable brightness and angle settings for convenient specimen observation.
Separate Embedding and Cryo Modules: The cryo module and embedding module use a separated design, allowing left-to-right or right-to-left configuration options.
Adjustable Cryo Module Temperature: The cryo module operates from plus 5 to minus 20 degrees C, with an optimal working temperature of approximately minus 10 degrees C stated in the technical specifications.
Large Cryo Module Working Area: The cryo module has a working size of 315x380mm, supporting cooling work after paraffin embedding.
Inverter Compressor for Cooling Control: The new-type inverter compressor allows adjustment of freezing temperature and supports lower energy use and stable operation as described in the product specification.
Flexible Module Linkage Option: An optional power serial port can link the cryo and embedding modules for coordinated automatic start and stop operation.
Automatic Restart After Power Loss: The automatic restart function allows the unit to resume operation after a power interruption, supporting workflow continuity.
Leave A MessageTissue embedding is a station with cooling plate, embedding center and conserving table. In embedding center, the temperature of dissolving paraffin can be adjusted through the electronic display. The minimum working temperature can be less than or equal to minus 20 degrees Celsius. There are a mini cooling plate and storage box in embedding center.
Tissue embedding is a station with cooling plate, embedding center. In embedding center, the temperature of dissolving paraffin can be adjusted through the LED. The minimum working temperature can be less than or equal to minus 20 degrees Celsius. There are a mini cooling plate and storage box in embedding center. The equipment can be purchased as a whole or separately.
Tissue embedding is a station with cooling plate, embedding center. In embedding center, the temperature of dissolving paraffin can be adjusted through the LED. There are a mini cooling plate and thermal chamber, paraffin dispenser, paraffin tank, paraffin waste tray, forceps holder, cooling plate in the whole set. The equipment can be purchased as a whole or separately.
YSD-330 Yushuoda Pathology Tissue Embedding Center with Large capacity 6.9L
YSD-300 Tissue Embedding Center station with Cold plate and hot Plate Lage capacity :4L , temperature arrange is RT~85 ℃
YSD-300 Tissue Embedding Center station with Cold plate and hot Plate Lage capacity :4L , temperature arrange is RT~85 ℃
Pathological Embedding Center Embedding machine is a machine used for fixing and wrapping biological tissue samples, mainly for histological research and pathological diagnosis in medical pathology laboratories, for the purpose of slicing and staining.
Embedding center cooling plate The embedding machine cold table is a device used for making pathological sections, which is used to control the temperature of the cold table and ensure that the sections can quickly cool and solidify in a short period of time. The embedding center cooling platform can accelerate the cooling rate of the tissue after embedding, reducing certain physical and chemical changes caused by prolonged exposure to high temperatures. This rapid cooling effect can ensure the stability and reliability of the sample.
Send A MessageIf you are interested in our products and want to know more details,please leave a message here,we will reply you as soon as we can.
IPv6 network supported
English
русский
español
