Heating 1. Prior to use fill with water at least halfway full - use care to avoid overflowing (Note: type of water – tap, distilled, purified, etc. is optional based on user requirements). 2. Turn on power switch and heat indicator light will illuminate indicating the unit is heating. Adjust temperature control dial to the proper setting and allow ample time for the Tissue Floating Bath to warm up. Temperature range is from room temperature to 75°C. Use a laboratory thermometer (not included) to determine actual water temperature based on dial setting and increase or decrease as desired. 3. Once the Tissue Floating Bath reaches your predetermined set temperature the heat indicator light will turn off indicating that the heater is off and unit is holding temperature. Making Sure Your Floating Section Is Flat 1. Swipe a slide underneath the floating paraffin section to pick up the section on the slide. Aftier drying the bottom of the slide place your slide on the outer edge of the Tissue Floating Bath. This will help the parafïn section to dry, flatten out and stick firmly to slide. A slide warmer might be needed for large quantities of slides or extended drying time. 2. Between floating paraffin sections you can use a lint-free disposable towel to wipe across the water to remove any leftover floating paraffin. 3. Add additional water as needed by pouring slowly into basin; allow several minutes for temperature to adjust and/or increase temperature control setting as needed.

A customer from Tajikistan purchased 60 sets of slide storage cabinets. Lab Pathology 14 Drawers Glass Slide Storage Cabinet and Block Wax Storage Cabinet It is used for storing paraffin blocks and slides. Each unit has 14 drawers.

An Indonesian customer purchased four hundred base molds Pathology laboratory supplies Stainless Steel Embedding Cassette Tissue Base Molds for paraffin molds Designed for facilitating same styles and same types of cassettes and embedding O rings in specimen embedding, compatible with most of the commonly-used embedding equipment. With fine polished surface and well-grounded corners. they are strong enough for limited re-use.

A Kenyan customer purchased 1000 lab histology slide drying storage plates. Lab Histology Slide Drying Storage Plate YSD histology slide storage tray Ideal for use in fields of cytology , histology , pathology and biology for tissue slide section mounting. It has a size of 48 * 32 cm, features a white color, and is made from plastic. Specifically designed for laboratory applications, it offers a specialized solution for the drying and storage of histology slides, facilitating the organized and appropriate handling of such slides within a laboratory setting.

A Nigeria  consumer purchase 500 laboratory pathology tissue slide staining tray YSD- Immunohistochemical Staining Tray TheIHCstaining slide trayunique design of the staining tray can save a lot of waste discharge time during the staining process, reduce your workload,and do not need to be transferred to other drying plates after staining, saving your operating time; the design with cover ensures the safety of the slide during transportation;

A  Congo consumer purchase 10000 laboratory pathology tissue plastic slide tray mailer Laboratory pathological tissue microscope slide tray mailer Designed as a convenient solution for temporary holding and transferring slide. Accommodates both the standard microscope slides in dimensions of 75.0mm×25.0mm and 76.0mm×26.0mm,with thickness from 0.8mm to1.2mm on the market.

A Mexico consumer purchase 2500pcs laboratory pathology tissue embedding base mold Laboratory Histology Pathological Tissue Embedding Cassettes Base Mold Product name tissue embedding cassettes base molds Material 304 stainless steel Size Net Well Dim (L*W) Net Well Dim (L*W*H) 0203-0001 7*7 52*35*11 0203-0002 15*15 52*35*11 0203-0003 24*24 52*35*11 0203-0004 37*24 52*35*11 0203-0005 30*24 52*35*11

Laboratory Slide Staining Jar And Rack For 24pcs Microscope Slide Medical Pathology glass Slide Staining Jar And Staining Rack is made of polypropylene material containing 24 slides. The temperature range of the product is -70℃~100℃.

China Laboratory Low Profile Microtome Blades Yushuoda Microtome BladesSupplied as disposables for facilitating the microtome and cryostat in tissue specimen sectioning, using the laterally displaceable blade holder, the quality microtome bladeswe supply below can be used as several blades just by the convenient cutting point re-positioning.

A Australia consumer purchase 100000 laboratory pp material disposable cryogenic tubes Laboratory Consumable 2ml Cryogenic Tubes Cryogenic tubes are suited for research and laboratory storage of cell cultures，bacteria and other samples in the vapor phase of liquid nitrogen. 1、The lid of this cryogenic tube is external thread. 2、Cryogenic tube‘s cap witha silicone gasket mounted in cap for additional leak-proof assurance. 3、The bottom of this cryogenic tube is self standing.